Table of Contents
Advertisement
6.2.5 CURRENT PROBES AND SENSORS
When installing probes, face the arrow on the probe in the direction of the load. Note that only AmpFlex
watertight; all other probes and sensors are non-watertight.
Nominal Range
Measurement Range
Probe Output Signal
Maximum Clamping
Diameter
Safety
NOTE: Currents <0.5A will be displayed as zero. Neutral current measures down to 0A.
Nominal Range
Measurement Range
Probe Output Signal
Maximum Clamping
Diameter
Safety
NOTE: Currents <0.5A will be displayed as zero. Neutral current measures down to 0A.
Nominal Range
Measurement Range
Probe Output Signal
Maximum Clamping
Diameter
Safety
NOTE: Currents <1A
AC/DC
Nominal Range
Measurement Range
Probe Output Signal
Maximum Clamping
Diameter
Safety
The 5A range of the MN193 is designed to work with secondary current transformers.
Best accuracy is available when entering the transformer ratio (e.g. 1000/5A). When used to measure 5A direct, the resolution will be limited
to 0.1A max.
NOTE: Currents < (Primary x 5) ÷ (Secondary x 1000) or <250mA on the 5A range and <0.2A on the 100A range will be displayed as zero with
this probe. Power calculations will also be zeroed when the current is zeroed.
100
Find Quality Products Online at:
for f ≤1kHz
1000A
AC
1A to 1200A
max (I >1000A not continuously)
AC
1mV
/A
AC
AC
2" (52mm)
EN 61010-2-032, Pollution Degree 2, 600V CAT IV, 1000V CAT III
for f ≤1kHz
200A
AC
2A to 240A
max (I >200A not permanent)
AC
5mV
/A
AC
AC
0.8" (20mm)
EN 61010-2-032, Pollution Degree 2, 300V CAT IV, 600V CAT III
1000A
, 1400A
max
AC
DC
10A to 1000A
, 10A to 1300A
AC
1mV/A
One 1.6" (42mm) or two 0.98" (25.4mm) or
two bus bars 1.96 x 0.19" (50 x 5mm)
EN 61010-2-032, Pollution Degree 2, 300V CAT IV, 600V CAT III
will be displayed as zero. Neutral current measures down to 0A.
5A and 100A
AC
5A: 0.005A to 6A
max (1A to 1200A with ratio 1000/5 selected)
AC
100A: 0.1A to 120A
max
AC
5A: 200mV/A
; 100A: 10mV/A
AC
0.8" (20mm)
EN 61010-2-032, Pollution Degree 2, 300V CAT IV, 600V CAT III
GlobalTestSupply
www.
Model SR193
Model MN93
Model MR193
PEAK AC+DC
Model MN193
AC
sensors are
®
Power Quality Analyzer PowerPad
.com
sales@GlobalTestSupply.com
®
III Model 8435
Advertisement
Table of Contents
