Table of Contents
Advertisement
12. In the Ready to Install the Program window, click on Install.
13. If the instrument selected for installation requires the use of a USB port, a warning box will appear, similar to Figure
5-4. Click OK.
NOTE: The installation of the drivers may take a few moments. Windows may even indicate that it is not responding, however
it is running. Please wait for it to finish.
14. When the drivers are finished installing, the Installation Successful dialog box will appear. Click on OK.
15. Next, the Installation Wizard Complete window will appear. Click on Finish.
16. A Question dialog box appears next. Click Yes to read the procedure for connecting the instrument to the USB port
on the computer.
NOTE: The Set-up window remains open. You may now select another option to download (e.g. Adobe
window.
17. Restart your computer, then connect the instrument to the USB port on the computer.
18. Once connected, the Found New Hardware dialog box will appear. Windows will complete the driver installation
process automatically.
Shortcuts for DataView
your desktop.
NOTE: If you connected your instrument to the computer before installing the software and drivers, you may need to use the
Add/Remove Hardware utility to remove the instrument driver before repeating the process.
Power Quality Analyzer PowerPad
Find Quality Products Online at:
and each instrument control panel selected during the installation process have been added to
®
®
III Model 8435
GlobalTestSupply
www.
Figure 5-3
Figure 5-4
.com
Reader), or close the
®
sales@GlobalTestSupply.com
75
Advertisement
Table of Contents
