Table of Contents
Advertisement
4.1.3.2 RMS DISPLAY SCREEN (L1)
Item Function
1
Instantaneous value cursor; change values with the cursor using the ◄ and ► buttons
- t: relative time position of the cursor
(t = 0 corresponds to the start of the Inrush capture)
2
- Values at the position of the cursor. In the example shown in Figure 4-9, V1: RMS value of voltage 1 in the half-cycle at the position
of the cursor; A1: RMS value of current 1 in the half-cycle at the position of the cursor
- MAX: maximum half-cycle RMS value of the Inrush current capture
3
- V: measured voltage
- A: measured current
NOTE: Filters L2 and L3 display the trend of the true half-cycle RMS current and voltage of phases 2 and 3. The screen is
identical to the one displayed for filter L1.
The
,
,
, and
value.
42
Find Quality Products Online at:
buttons are used to go to the first occurrence of a minimum or maximum voltage or current
GlobalTestSupply
www.
Figure 4-9
Power Quality Analyzer PowerPad
.com
®
III Model 8435
sales@GlobalTestSupply.com
Advertisement
Table of Contents
