Table of Contents
Advertisement
The values in this screen are as follows:
Item
Function
Wh
Active energy consumed
VARh
Reactive energy consumed
Distortion energy. This value only appears when the Non-Active Values setting is set to Separated in the VAR tab of the Calculation
VADh
Methods screen. If this setting is set to Combined, the VADh value does not appear and the VARh label corresponds to the non-active
power (N). This non-active power is unsigned and has no inductive or capacitive effect.
VAh
Apparent energy consumed
Inductive reactive effect
Capacitive reactive effect
The screen also shows DC energy if a DC sensor is connected to the Model 8435.
4.6.1.3 3L ENERGY GENERATED
The
Energy Generated screen displays the meters of the energy generated by the load.
The values in this screen are as follows:
Item
Function
Wh
Active energy generated
VARh
Reactive energy generated
Distortion energy. This value only appears when the Non-Active Values setting is set to Separated in the VAR tab of the Calculation
VADh
Methods screen. If this setting is set to Combined, the VADh value does not appear and the VARh label corresponds to the non-active
power (N). This non-active power is unsigned and has no inductive or capacitive effect.
VAh
Apparent energy consumed
Inductive reactive effect
Capacitive reactive effect
The screen also shows DC energy if a DC sensor is connected to the Model 8435.
Power Quality Analyzer PowerPad
Find Quality Products Online at:
®
III Model 8435
GlobalTestSupply
www.
Figure 4-42
.com
sales@GlobalTestSupply.com
67
Advertisement
Table of Contents
