Table of Contents
Advertisement
5.1 INSTALLING DATAVIEW
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE SOFTWARE AND DRIVERS.
NOTE: When installing, the user must have Administrative access rights during the installation. The users access rights can be
changed after the installation is complete.
5.1.1 USB FLASH DRIVE INSTALL
1. Insert the USB stick into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
NOTE: If Autorun is disabled, it will be necessary to open Windows Explorer, then locate and open the USB stick drive labeled
"DataView" to view the files on the drive.
3. In the AutoPlay window, select Open Folder to view Files.
4. Double-click on Setup.exe from the opened folder view to launch the DataView setup program.
NOTE: Depending on your operating system, the User Account Control dialog box may be displayed. Provide a positive
response when prompted to proceed.
5. A Set-up window, similar to the following, will appear.
Power Quality Analyzer PowerPad
Find Quality Products Online at:
5. DATAVIEW
®
DataView
®
III Model 8435
GlobalTestSupply
www.
SOFTWARE
®
®
must be reinstalled for each user in a multi-user system.
Figure 5-1
.com
sales@GlobalTestSupply.com
73
Advertisement
Table of Contents
