Table of Contents
Advertisement
3.2.6.2 TRANSIENT CURRENT THRESHOLDS
To display the Transient Current Thresholds screen, open the Capture Mode screen and press the A button.
1. The process for setting the transient current threshold is similar to setting the transient voltage threshold. Select
Threshold Set-up, highlighted in yellow, by pressing
select the threshold configuration.
2. Use the ▲ or ▼ button to go from one type of configuration to another.
3. Press
to validate the choice of configuration.
4. Select the field of the first threshold using the ▲ or ▼ button. The selected field is highlighted in yellow. Press
displays the arrows in the field.
5. Use the ▲ or ▼ button to increment or decrement a value and ◄ or ► to go to the next digit in the value.
6. Press
to validate the programming of the threshold.
To return to the Configuration screen, press
You can configure the current thresholds in mA, A, or kA.
28
Find Quality Products Online at:
Figure 3-15
. The ▲ and ▼ buttons appear in the field to enable you to
.
GlobalTestSupply
www.
Power Quality Analyzer PowerPad
.com
sales@GlobalTestSupply.com
to
®
III Model 8435
Advertisement
Table of Contents
