Table of Contents
Advertisement
Item
Function
1
Reminder of the mode used
2
Display of sub-mode used
3
Flashing
icon: indicates that the search has been started
4
Memory indicator. Black area = used memory; White area = available memory
5
Transients search start time
6
Transients search end time
7
Number of transients
8
Name of transient
To configure and start the programming of a search:
1. Select and set the desired configurations for the start/stop date and time, count, and series name. Use the ▲ and ▼
buttons to navigate from one field to another, the
the field, and the ▲ and ▼ buttons to enter numbers and letters into the field. For example, in the Name field the ▲
and ▼ buttons cycle up and down through the alphabet and numbers 0 through 9.
2. To start programming a search between the start and end times which you have defined press the yellow button for
the
icon.
● The
icon disappears and the
● When the start time is reached the message Detection in progress is displayed.
● When the stop time is reached, the
Transients are recorded in relation to the voltage and/or the current in accordance with the configured activation thresholds. If
an activation occurs in relation to the current, a record of the current waveform and voltage is made.
4.1.1.2 STOPPING A SEARCH
The search can be manually stopped before the end time and date by pressing the
will reappear in the same location.
36
Find Quality Products Online at:
button to select the field, the ◄ and ► buttons to navigate within
icon appears instead.
icon is displayed again. It is then possible to program a new search.
GlobalTestSupply
www.
icon's yellow button. The
Power Quality Analyzer PowerPad
.com
sales@GlobalTestSupply.com
icon
®
III Model 8435
Advertisement
Table of Contents
