Vf Disp Switch - Sony BVP-550 Maintenance Manual

2-10. Replacement of Function Switches

2-10-3. VF DISP Switch

1. Remove the four screws and remove the CCD unit
referring to "2-7-1. VF Connector".
2. Disconnect three connectors CN3 on the DR-271
board, CN3 on the TG-159 board and CN2 on the PA-
181 board.
n
When disconnecting the connectors, refer to "2-8.
Disconnecting/Connecting of Flexible Card Wires"
and "2-7-1. VF Connector".
3. Remove the three screws and remove the handle.
4. Remove the three screws and remove the handle
holder.
X
B5 12
B4
Handle holder
X
B3 5
2-14 (E)
X
B4 8
Handle
X
B4 8
X
8
5. Remove the two screws and remove the menu bracket.
SW-732
6. Remove the two screws and remove the SW-732 board
and the drop protection cushion.
7. Unsolder the terminals and remove the switch to be
replaced.
8. Install a new switch in the reverse procedures of
removal.
X
B2.6 5
Menu bracket
SW-732
Drop protection cushion
X
B2.6 5
BVP-550
BVP-550P