Sony BVP-550 Maintenance Manual page 492

4-1. Preparation
4-1-3. Connections
CCD UNIT
OHB
ENG/EFP LENS
PATTERN
BOX
4-1-4. Description of Setup Menu
A part of adjustments given in this section uses the setup
menu. The setup menu consists of the following menus.
Besides there is a TOP menu indicating the entire configu-
ration of menu items.
Operation
Paint
Maintenance
Reference File
Triming File
System config
To display all of the menus, switch setting of the AT-95 board is
required. And for details on the setup menu, refer to Section 3.
In this manual, describes the setup menu operation as follows.
Title of the selected page (top right corner display)
For reference:
When Paint → Skin Detail is selected:
MENU : Paint
PAGE : Skin Detail (P4)
Displaying Setup Menu
1. Set the internal switches of the AT-95 board as
follows.
S1-1 → ON
S1-2 → OFF
S1-3 → ON
S1-4 → OFF
4-2 (E)
1.5" VF
BVF-10/10CE
CAMERA
ADAPTOR
CA-550/550/P
COLOR VIDEO
CAMERA
AC ADAPTOR
BVP-550
AC-550/550CE
MASTER SETUP UNIT
MSU-700
TEST OUT
DC IN
CCA-5 CABLE
(max. 200m)
Oscilloscope
2. DISP switch (on the side panel) → OFF
3. POWER switch (on the camera adaptor) → ON
4. Set the DISP switch to MENU (from OFF) while
holding down the MENU SEL switch (on the front
panel). (TOP menu will be displayed.)
n
If the power switch is turned off once, perform the above
operations again to display the setup menu (steps 2 to 4).
How to change the setting values
To enter or cancel the setting value of items, which can be
changed by turning the MENU SEL switch, proceed as
follows.
To enter the setting value;
Press the MENU SEL switch to ENTER.
To cancel the setting value;
Before pressing the MENU SEL switch, press the CAN-
CEL button. The original setting is restored.
After pressing the MENU SEL switch, the setting can not
be canceled.
File Store
If the adjustments in this section are suspended or the
power is turned off to extend a printed circuit board and so
on, be sure to execute the FILE STORE before being
powered off.
Waveform monitor
A-ch
PIX
75Ω
Vector scope
Color monitor
75Ω
BVP-550