Sony BVP-550 Maintenance Manual page 920

Digital 1000 series color video camera
Hide thumbs Also See for BVP-550:
Table of Contents

Advertisement

3-1. Setup Menu
3-1-6. System Config Menu
Page
Ver.
Item
PRE KNEE/
WHITE CLIP
ZEBRA
WHITE CLIP
ZEBRA1 LEVEL, XXX ([XX])
RANGE
ZEBRA2 LEVEL XXX ([XX])
Z.DISP
TEST
VTR/CCU
VTR R-Y
VTR B-Y
CCU Y SAMP
CCU R-Y SYNC XXX ([XX])
CCU B-Y SAMP XXX ([XX])
RGB OFFSET
TEST
CB
IRIS
LEVEL
APL RATIO
COLOR
1.10
COLOR REF
SETUP
(SELF)
1.10
COLOR SETUP Press MENU SEL
(SELF)
1.10
(OHB MATRIX)
G-R, B-R
R-G, B-G
R-B, G-B
1.10
OHB MTX
1.10
CM ADD LVL
1.10
CM ADD
COLOR
m) When performing compensation between two or more cameras, use the MSU.
n)
Differing from the color-setup operation by plural cameras, a data transfer is not performed.
Execute to recalculate. After execution, the color matrix data is temporarily reflected in the OHB matrix of the System Config menu.
Execute the OHB FILE STORE of the Triming menu to store the color matrix data.
r)
Adjust with the MATRIX of the Paint menu turned OFF. Execute the OHB FILE STORE to store the adjustment values.
s)
The compensation value is temporarily reflected in the OHB matrix of the System Config menu after execution of the COLOR
SETUP(SELF). Execute the OHB FILE STORE of the Triming menu to store the value.
The higher you set the value of the CM ADD LVL, the more the weights are assigned to the color selected by the CM ADD COLOR.
The compensation is performed so as to entirely minimize the error, while reducing the error for the weights-assigned color.
t)
After powered off once following the completion of color-setup operation, recalculation is not performed.
3-14(E)
Settings
Contents
XXX ([XX])
Adjusts the white clip level.
[ON], OFF
Turns the white clip function on and off.
Sets the center value and range for the zebra 1 signal detection.
Sets the detection value for the zebra 2 signal.
1,2, 1&2
Selects a zebra signal to be displayed on the viewfinder.
1
: Zebra 1 signal
2
: Zebra 2 signal
1&2 : Both zebra 1 and 2 signals are displayed at the same time.
1, 2, [OFF]
Selects a TEST signal to be output in setting each item on the
PREKNEE/ZEBRA page.
1
: Outputs the sawtooth test signal
2
: Outputs the 3-step waveform test signal
OFF : No test signal is output
XXX ([XX])
Adjusts the R-Y color-difference signal level.
XXX ([XX])
Adjusts the B-Y color-difference signal level.
XXX ([XX])
Adjusts the level of the sample pulse to be mixed with the Y signal.
Adjusts the level of the sync pulse to be mixed with the R-Y signal.
Adjusts the level of the sample pulse to be mixed with the B-Y signal.
XXX ([XX])
Adjusts the G signal level.
1, 2, [OFF]
Selects a TEST signal to be output in setting each item on the VTR/CCU page.
1
: Outputs the sawtooth test signal
2
: Outputs the 3-step waveform test signal
OFF : No test signal is output
ON, [OFF]
Turns on and off the camera color-bar signal to be output in setting
each item on the VTR/CCU page.
XXX ([XX])
Adjusts the auto-iris level.
Sets the way the iris is automatically adjusted. -99 (PEAK) ↔ 99 (AVERAGE)
XXX ([0])
Press MENU SEL
Makes a color reference to compensate the difference in colors
switch to execute.
between OHBs using a single camera. (Locate the desired colors of a
Macbeth chart within the gate marker of VF and measure. To abort a
processing during execution, press MENU SEL switch.)
Automatically calculates the color matrix from the reference. (Locate the
switch to execute.
desired colors of a Macbeth chart within the gate marker of VF and measure.
To abort a processing during execution, press MENU SEL switch.)
Compensates the OHB matrix to adjust the difference between OHBs or
-99 to 99 ([0])
cameras (sets an optional value as the constant for G-R, B-R, R-G,
B-G, R-B and G-B).
[ON], OFF
Turns the OHB matrix compensation on and off.
[0] to 16
For fine adjustment in color-setup operation. Compensates the
caluculation value for the color selected by the CM ADD COLOR in 16
steps and recalculates the OHB matrix. (Selecting 0 turns off the function.)
[0] to 17
For fine adjustment in color-setup operation. Select a color to be
compensated from 18 colors of the Macbeth chart with the gate marker
of VF. Recalculates the OHB matrix
r)
t)
m)
n)
s) t)
BVP-550

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bvp-550p

Table of Contents