Sony BVP-550 Maintenance Manual page 48

3-1. Setup Menu
Page Item
AUTO SET UP AUTO WHITE
AUTO BLACK
LEVEL AUTO
AUTO HUE
DETECT
COLOR MATCH
WHITE SHADING Press MENU SEL
BLACK SHADING Press MENU SEL
DATE/TIME DD/MM/YY
HH:MM:SS
DATE ON BARS
TIME ON BARS
OTHERS S/N MEASURE
MOD MEASURE
MASTER BLACK
DETAIL
CHROMA
GAMMA
MATRIX
FLARE
c) When executing the LEVEL AUTO, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence. After the adjustment is complete, adjustment result is stored as a reference file.
1. Lens is automatically closed and the black balance is automatically adjusted.
2. The white balance is automatically adjusted using TEST 2 (3-step) signal.
n
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual
object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the LEVEL AUTO adjustment does not contain the gamma and knee adjustments unlike a conventional camera.
d) Before first using the camera with the OHB-450/451/550/550WS (or their PAL version) installed, or After replacing the CCD unit, be
sure to execute the automatic black shading adjustment.
3-10(E)
Settings Contents
Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
Press MENU SEL Starts to automatically adjust the black balance.
switch to execute.
Press MENU SEL Starts to automatically adjust the level in the internal circuits.
switch to execute.
Press MENU SEL Starts to automatically adjust the volume of effect of the
switch to execute. hue function. (Does not function at present.)
Press MENU SEL Starts to automatically perform the COLOR MATCH adjustment to match
switch to execute. in color between two or more cameras. (Does not function at present.)
Starts to automatically adjust the white shading. (Does not function at present.)
switch to execute.
Starts to automatically adjust the black shading.
switch to execute.
Adjusts a built-in timer. (HH;hour/MM;minute only)
ON, [OFF]
Selects whether the date characters are mixed with a camera output
signal in the color-bar mode, or not.
ON, [OFF]
Selects whether the time characters are mixed with a camera output
signal in the color-bar mode, or not.
ON, [OFF]
ON : Set to ON in mesuring the S/N ratio. And settings of the DETAIL,
CHROMA, GAMMA, MATRIX, and FLARE will be temporarily turned OFF.
OFF: Settings of DETAIL and so on are returned as they were.
ON, [OFF]
ON : Set to ON in mesuring the modulation depth. And settings of the
DETAIL, GAMMA, MATRIX, and FLARE will be temporarily turned OFF.
OFF: Settings of DETAIL and so on are returned as they were.
-99 to 99 ([0]) Adjusts the master black in measuring the S/N ratio and modulation depth.
[ON], OFF
[ON], OFF
[ON], OFF
[ON], OFF
[ON], OFF
c)
skin detail auto
d)
BVP-550
BVP-550P