Cn-1120/1121 Board - Sony BVP-550 Maintenance Manual

2-9. Board Replacement

2-9-2. CN-1120/1121 Board

1. Remove the right side panel of the camera. (Refer to
"2-2. Removal of Cabinet".)
2. Pull out the five plug-in boards and the four shielding
plates.
3. Remove the DC/DC convertor unit.
(Refer to "2-11. Replacement of DC/DC Convertor
Unit".)
4. Remove the rail(upper).
5. Remove the four screws and remove the rail bracket.
X
B3 5
Rail(upper)
2-12 (E)
6. Remove the two screws and remove the CN-1120/
7. Disconnect the connector.
X
B2.6 5
X
B2.6 5
Rail
bracket
8. Install a new board in the reverse procedures of
1121 board.
n
When disconnecting the flexible card wires, refer to
"2-8. Disconnecting/Connecting of Flexible Card
Wires".
CN-1120
CN-1121
removal.
Precision
X
P2 5
BVP-550