Table of Contents
Advertisement
2-13. REMOVAL OF EVF ASSEMBLY (VF-42 BOARD)
8
Two screws
(M2 X 10)
0
Remove a claw and
remove the VF-42 board.
0
Connector CN50 1 4P
0
CRT assembly
Claw
8
Pull out the connector
through the square hole.
f) EVF cabinet (L) assembly
0
Remove the finder holder assembly in the
arrow direction. (Pull out to the position of
the makking-off line and remove by turning
in the arrow direction.)
0
Remove the EVF cabinet (R) by
lifting up with the claw as its fulcrum.
-34-
Advertisement
Table of Contents
