2-7. Replacement of External Connectors
2-7. Replacement of External
Connectors
2-7-1. VF Connector
1. Remove the four screws and remove the CCD unit.
2. Disconnect the three connectors CN3 on the DR-271
board, CN3 on the TG-159 board and CN2 on the PA-
181 board of the CCD unit.
n
When disconnecting the flexible card wires, refer to
"2-8. Disconnecting/Connecting of Flexible Card
Wires".
TG-159
CCD Unit
PA-181
X
B4
8
X
B4
8
X
B4
8
X
B4
8
2-8 (E)
CN3
DR-271
3. Remove the two screws and remove the VF connector.
Then unsolder it.
VF connector
Precision
X
P2.6
5
4. Install a new connector in the reverse procedures of
removal.
2-7-2. MIC Connector
1. Remove the two screws and remove the MIC connec-
tor.
Then unsolder it.
MIC connector
2. Install a new connector in the reverse procedures of
removal.
Precision
X
P2.6
5
BVP-550