Sony BVP-550 Maintenance Manual page 478

3-1. Setup Menu
3-1-1. Operation Menu
Page Ver. Item
GAIN SW LOW
MID
HIGH
WIDE SCREEN 16:9/4:3 MODE
(For OHB-550WS
/550WSP)
VF ASPECT
4:3 SAFETY
16:9 ID ON VF
16:9 ID
ON BARS
BNC TEST OUT [VBS], RM, VF Y
MON OUT
RM/MON CHAR [ON], OFF
VBS LOCK
VF VIDEO
MODE
[RGB]-G
AUTO IRIS IRIS OVERRIDE
AUTO KNEE
(DCC)
IRIS OVERRIDE
APL RATIO
AUTO KNEE
POINT
AUTO KNEE
SLOPE
b) The change of aspect ratio using this menu is disabled because the CCU' s setting has a priority when the CCU is connected.
If you want to change the aspect ratio when the CCU is connected, use the OTHERS page of the Paint menu. When you attempt to
change using this menu, a message "Use Paint MNU" is displayed.
3-4(E)
Settings Contents
-3,[0], 3, 6, 9, 12, Selects the gain value for each gain switch position.
18, 24, 30 dB (LOW, MIDDLE, HIGH)
-3, 0, 3, 6, [9], 12,
18, 24, 30dB
-3, 0, 3, 6, 9, 12,
[18], 24, 30dB
[16:9], 4:3
Selects the aspect ratio for the video signal output.
(This setting is valid only when the camera is used alone.)
[AUTO], 4:3
Selects the aspect ratio for the viewfinder indication.
AUTO: Automatically selects according to the aspect ratio selected by
4:3 : Selects 4:3 regardless of the 16:9/4:3 MODE setting.
ON, [OFF]
Selects whether the safety zone marker showing the 4:3 area is
indicated in the 16:9 mode, or not.
ON, [OFF]
Turns on and off the 16:9 indication in the 16:9 mode on the viewfinder
screen.
(This setting is valid only when the DISP switch is set to on or off.)
ON, [OFF]
Selects whether the 16:9 indication is displayed on the internal color-bar
in the16:9 mode, or not.
(This setting is valid only when the DISP switch is set to on or off.)
Selects a video signal to be output at TEST OUT connector.
VBS : Color composite signal
RM : The same as a signal ouput to RM-P9
Y : Y(monochrome) signal
Selects whether character signals displayed on the viewfinder screen
are mixed with the VBS signal to be output to RM-P9, or not. Turning on
is convenient to operate the setup menu by RM-P9.
ON, [OFF]
Used to prevent misoperation by ENC/RGB switch.
ON : ENC signal is output at TEST OUT connector regardless of
OFF : A signal selected by ENC/RGB switch is output.
[Y], MIX, NAM
Selects a video signal to be output to the viewfinder.
Y : Y=0.3R+0.59G+0.11B; The same as a camera output signal
MIX : Y=0.33R+0.33G+0.33B
NAM : Selects one of the R, G, and B signal that is maximum in level.
ON, [OFF]
Sets signals selectable by RGB switch.
ON : R-G, B-G
OFF : R, G, B
-99 to 99 ([0]) Sets the reference value for automatic iris adjustment.
-99 (further closed) ↔ 99 (further opened)
ON, [OFF]
Turns the auto-iris override function on and off.
-99 to 99 ([0]) Sets the way the iris is automatically adjusted.
-99 (PEAK) ↔ 99 (AVERAGE)
-99 to 99 ([XX]) Sets the point on which the knee function starts to have effect in the
auto-knee mode.
-99 to 99 ([XX]) Sets the volume of the effect of the knee function in the auto-knee mode.
16:9/4:3 MODE on the WIDE SCREEN page.
a)
ENC/RGB switch setting.
b)
BVP-550