Sony BVP-550 Maintenance Manual page 267

3-1-3. Maintenance Menu
The Maintenance menu is used for encoder output level and other adjustments items necessary for
camera's maintenance. The Maintenance menu is not normally accessible. To display this menu, switch
setting of the AT-95 board is required.
For details, refer to Section 1-3. "Function of Internal Switches—AT-95 board".
To activate the Maintenance menu, first display the TOP menu.
(Boxed items under "Settings" indicate the factory setting.)
Page Item
VBS SYNC LEVEL
Y LEVEL
BURST LEVEL
CHROMA LEVEL
Q/V LEVEL
SET UP
BF PHASE
SC-H PHASE
V BLANKING
WHITE SHADING V SAW R/G/B/M
V PARA R/G/B
H SAW R/G/B
H PARA R/G/B
WHITE R/G/B
V MOD R/G/B/M
V MOD
AUTO WHITE
CLEAR
BLACK SHADING V SAW R/G/B
H SAW R/G/B
BLK SET R/G/B
BLACK R/G/B/M
MASTER GAIN
AUTO BLACK
CLEAR
b) When the master modulation shading is adjusted, the V. SAW component for the R and B V-modulation shadings of the prism is
simultaneously compensated.
BVP-550
Settings Contents
-99 to 99 ([XX]) Adjusts the sync level of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the Y level of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the burst level of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the chroma level of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the Q (or V) level of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the sync level of camera's encoder output signal.
(This setting is valid only for NTSC.)
-99 to 99 ([XX]) Adjusts the burst phase of camera's encoder output signal.
-99 to 99 ([XX]) Adjusts the SC-H phase of camera's encoder output signal.
19,[20],21H Adjusts the V blanking width of camera's encoder output signal.
(This setting is valid only for NTSC.)
In connection with CCU, the width is fixed to 19H.
* For a PAL model, the width is fixed to 25H at all times.
-99 to 99 ([XX]) Adjusts the volume of V.SAW compensation for the R, G, B or master
white shading.
-99 to 99 ([XX]) Adjusts the volume of V.PARA compensation for the R, G, or B white shading.
-99 to 99 ([XX]) Adjusts the volume of H.SAW compensation for the R, G, or B white shading.
-99 to 99 ([XX]) Adjusts the volume of H.PARA compensation for the R, G, or B white shading.
-99 to 99 ([XX]) Adjusts the R, G, or B white level.
-99 to 99 ([XX]) Adjusts the volume of V.SAW compensation for the R, G, B or master
modulation shading of the lens and prism.
ON, [OFF]
Turns the V modulation shading on and off.
Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
Press MENU SEL Resets numeric settings to "0" on the WHITE SHADING page.
switch to execute. (When you press the MENU SEL switch, the "CLEAR" indication flashes.
Press the MENU SEL switch again to execute; press CANCEL button to cancel.)
-99 to 99 ([XX]) Adjusts the volume of V.SAW compensation for the R, G, or B black shading.
-99 to 99 ([XX]) Adjusts the volume of H.SAW compensation for the R, G, or B black shading.
-99 to 99 ([XX]) Adjusts the volume of BLACK SET compensation for the R, G, or B.
-99 to 99 ([XX]) Adjusts the R, G, B or master black level.
-3,0,3,6,9,12,18, Selects the master gain value.
24,30 dB ([X])
Press MENU SEL Starts to automatically adjust the black balance.
switch to execute.
Press MENU SEL Resets numeric settings to "0" on the BLACK SHADING page.
switch to execute. (When you press the MENU SEL switch, the "CLEAR" indication flashes.
Press the MENU SEL switch again to execute; press CANCEL button to cancel.)
3-1. Setup Menu
b)
3-9(E)