Sony BVP-550 Maintenance Manual page 265

Page Item
SKIN DETAIL SKIN DETAIL
LEVEL
PHASE
WIDTH
SATURATION
GATE
AUTO HUE
DETECT
CLEAR
GAMMA GAMMA, R/G/B/M
COARSE
GAMMA
BLACK GAMMA
BLACK GAMMA
TEST
CLEAR
KNEE/W.CLIP POINT
SLOPE
KNEE
AUTO KNEE
KNEE MAX
WHITE CLIP
WHITE CLIP
TEST
CLEAR
BVP-550
Settings Contents
ON, [OFF]
Turns the skin detail function on and off.
–99 to 99 ([0]) Adjusts the level of the skin detail.
100° to 170°([0]) Adjusts the hue for the skin detail function.
0° to 90° ([0]) Adjusts the color width for the skin detail function.
–99 to 99 ([0]) Adjusts the color saturation of the skin detail function.
ON, [OFF]
Turns the area display of the skin detail function in the viewfinder screen.
Press MENU SEL Sets the range of skin detail hue function automatically.
switch to execute. (Does not function at preset.)
Press MENU SEL Sets all settings on the SKIN DETAIL page to 0.
switch to execute. (When you press MENU SEL switch, the "CLEAR" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
–99 to 99 ([0]) Adjusts the R, G, B and master gamma level.
0.40, [0.45], 0.50
Selects the gamma value in steps.
[ON], OFF
Turns the gamma value on and off.
–99 to 99 ([0]) Adjusts the black gamma (master).
(Note: A noise appears on the screen during operation.)
ON, [OFF]
Turns the black gamma function on and off.
(Note: A noise appears on the screen during operation.)
1, 2, [OFF]
Selects the test signal.
1 : Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output
Press MENU SEL Resets all settings on the GAMMA page to the factry settings.
switch to execute. (When you press MENU SEL switch, the "CLEAR" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
–99 to 99 ([0]) Adjusts the knee point level when the function is OFF.
–99 to 99 ([0]) Adjusts the knee slope level when the function is OFF.
[ON], OFF
Turns the knee function on and off.
ON, [OFF]
Turns the auto knee function on and off.
ON, [OFF]
Turns on and off the knee max function which changes the slope to
completely collapsed form.
–99 to 99 ([0]) Adjusts the white clip level.
[ON],OFF
Turn the white clip function on and off.
1, 2, [OFF]
Selects the test signal.
1 : Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
OFF : No test signal is output
Press MENU SEL Sets all settings on the KNEE/W.CLIP page to 0.
switch to execute. (When you press MENU SEL switch, the "CLEAR" indication flashes.
Press MENU SEL switch again to execute; press CANCEL button to cancel.)
3-1. Setup Menu
3-7(E)