Connection Connector; Installaton Conditions; Function Of Internal Switches - Sony BVP-550 Maintenance Manual

1-1. Connectors and Cables

1-2. Installaton Conditions

1-3. Function of Internal Switches

1-1-2. Connection Connector

Connection made with the connector panels during instal-
lation or service, should be made with the connectors/
complete cable assemblies specified in the following list,
or equivalent parts.
Connector Name Connection Connectors/Cables
TEST OUT 1-560-069-11 Plug, BNC or
(BNC) B-B Cable assembly
(cable length 1.5 m, option)
REMOTE 1-560-078-00 Plug, 6P Male or
(6P FEMALE) HIROSE HR10-7PA-6P equivalent
MIC IN 1-508-084-00 XLR, 3P Male or
(3P FEMALE) CANNON XLR-3-12C equivalent
1-2. Installaton Conditions
Operating Temparature : –20°C to +45°C
Storage Temparature : –20°C to +50°C
Humidity : No condence
• Install the unit in a location as dry and well-ventilated as
possible.
• Do not install the unit in the following conditions.
High temparature room or near the heat source
Excessive dust or mechanical vibration
Intense magnetic and electric fields
A place subjected to direct sunlight or strong light
1-6 (E)
1-3. Function of Internal Switches
AT-95 Board
4
AT
AT 95(COMPONENT SIDE)
S1 : Setup menu select switch (S1-1 to S1-4)
Setup menu indicated on the viewfinder can be selected in
combination of switches S1-1 to S1-4.
( ) in parentheses: Factory-set positions
S1-1 S1-2 S1-3 S1-4 Operation Paint Maintenance Reference Triming Config
OFF OFF OFF OFF YES NO
(ON) (OFF) (OFF) (OFF) YES YES NO
OFF ON OFF OFF YES YES YES
ON ON OFF OFF YES YES YES
OFF OFF ON OFF YES YES YES
ON OFF ON OFF YES YES YES
For details on the setup menu, refer to Section 3.
3 2 1
A
B
C
D
S1 E
F
G
Setup Menu
NO NO NO NO
NO NO NO
NO NO NO
YES NO NO
YES YES NO
YES YES YES
BVP-550