Sony BVP-550 Maintenance Manual page 477

3-1-1. Operation Menu
This menu contains items contained for changing camera settings to suit shooting conditions during
normal camera operations.
(Boxed items under "Settings" indicate the factory setting.)
Page Ver. Item
VF DISPLAY ZOOM
SHUTTER
IRIS
AUDIO
TAPE
ZEBRA
MESSAGE
MODE
FILTER
WHITE
GAIN
MARKER CENTER
SAFETY ZONE
BOX CURSOR
BOX H POS
BOX V POS
BOX WIDTH
BOX HEIGHT
a) In the 16:9 mode, the following kinds of safety zone marker can be selected in combination of the settings of "SAFETY ZONE" and
"4:3 SAFETY".
4:3
SAFETY ON
OFF
BVP-550
Settings
[ON], OFF
[ON], OFF
[ON], OFF
[ON], OFF
[ON], OFF
ON, OFF
[ON], OFF
CHG, [USR]
*, [ON], OFF
*, [ON], OFF
*, [ON], OFF
[ON], OFF
80%, 90% , OFF
ON, [OFF]
-99 to 99 ([0])
-99 to 99 ([0])
00 to 99 ([41])
00 to 99 ([10])
SAFETY ZONE
80%
16:9
4:3 area
Safety
zone
Contents
Turns on and off the indications of zoom position and lens extender.
Turns on and off the indications of shutter speed and mode.
Turns the iris setting indication on and off.
Turns the audio level indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
Turns the tape-remaining indication on and off.
(Automatically turned OFF in connection with CCU/RCP)
Turns the zebra indication on and off. (Corresponds to the ZEBRA
switch of VF connected to the camera.)
Turns on and off the indication of message in changing each setting of filter,
white balance memory, gain value, DCC(auto knee) and shutter speed.
The indication is displayed within three seconds in the center of the
viewfinder screen.
CHG : The indications of the optical filter, white balance memory and
gain value are displayed only when they differ from the standard
settings (FILTER:1B, WHITE:A, GAIN:0dB)
USR : The indications are displayed corresponding to the settings on
the VF DISPLAY page.
Turns the optical filter indication on and off.
Turns the white balance memory indication on and off.
Turns the gain value indication on and off.
Turns the center marker indication on and off.
Turns the safety zone marker indication on and off and selects the area
indicated by that marker. a)
Turns the box cursor indication on and off.
Shifts horizontally the location of the box cursor on the screen.
Shifts vertically the location of the box cursor on the screen.
Sets the width of the box cursor.
Sets the height of the box cursor.
90%
Not indicated
3-1. Setup Menu
3-1-1. Operation Menu
OFF
3-3(E)