Replacement Of Function Switches; Side Switch Panel Block; Front Switch Panel Block - Sony BVP-550 Maintenance Manual

2-10. Replacement of Function Switches

2-10-1. Side Switch Panel Block

1. Remove the two screws and remove the side switch
panel.
2. Disconnect the connector CN801 on the SW-730
board.
3. Remove the two screws.Remove the SW-730 board,
shielding plate and drop protection cushion.
4. Unsolder the terminals and remove the switch to be
replaced.
Switch garud
Shielding plate
Drop protection
cushion
5. Install a new switch in the reverse procedures of
removal.
BVP-550
CN801
Precision
X
P2.6 5
SW-730
Side switch panel
X
BTP2.6 6
X
BTP2.6 6
SW-730

2-10-2. Front Switch Panel Block

1. Remove the two screws and remove the front switch
panel.
2. Disconnect the connector CN501 on the SW-731
board.
SW-731
Precision
X
P2.6 5
Front switch panel
3. Remove the two screws.Remove the SW-731 board,
knob packing, VR knob and shielding plate.
4. Unsolder the terminals and remove the switch to be
replaced.
5. Install a new switch in the reverse procedures of
removal.
2-10. Replacement of Function Switches
CN501
Shielding plate
SW-731
X
P2.6
X
P2.6 5
2-13 (E)
5