Sony BVP-550 Maintenance Manual page 269

3-1-4. Reference Menu
The Reference menu stores the reference values used for automatic setup adjustment and the standard
settings of the switches as the reference files. And the menu can clear the current reference files. The
Reference menu is not normally accessible. To display this menu, switch setting of the AT-95 board is
required. For details, refer to Section 1-3. "Function of Internal Switches—AT-95 board". To activate
the Reference menu, first display the TOP menu.
m
1. Executing the FILE STORE on the REFERENCE FILE page registers settings of items, which have
been set through the Paint, Maintenance and System config menus just before the file store, as the
reference values.
2. When changed numbers of items are returned to the reference values stored as the reference files,
recall the standard file using an MSU/RCP or the setup menu.
Page Item
REFERENCE FILE STORE
FILE
CLEAR FILE
LENS FILE FILE STORE
e) If the power is turned off without execution of the FILE STORE after clearing the file, the original setting is restored.
3-1-5. Triming Menu
The Triming menu stores the adjustment data in replacing parts as the triming files. And the menu can
clear the current adjustment values. The Triming menu is not normally accessible. To display this
menu, switch setting of the AT-95 board is required. For details, refer to Section 1-3. "Function of
Internal Switches—AT-95 board". To activate the Triming menu, first display the TOP menu.
n
Executing the FILE STORE on the TRIMING FILE page registers settings of items, which have been
set through the Maintenance and System config menus just before the file store, as the reference values.
Page Item
TRIMING FILE FILE STORE
CLEAR FILE
OHB FILE FILE STORE
e) If the power is turned off without execution of the FILE STORE after clearing the file, the original setting is restored.
BVP-550
Settings Contents
Press MENU SEL Stores the adjustment value on each item as the reference value.
switch to execute.
Press MENU SEL Clears the adjustment values stored as the reference files.
switch to execute. (Temporarily clears the current reference files
Press MENU SEL Stores specific data for a lens to be used as the lens files. The standard
switch to execute. values are stored at the factory. (Does not function at present.)
Settings Contents
Press MENU SEL Stores the adjustment value on each item as the reference value.
switch to execute.
Press MENU SEL Clears the adjustment values stored as the triming files.
switch to execute. (Temporarily clears the current triming files
Press MENU SEL Stores specific data for a CCD unit to be used as the OHB files.
switch to execute. The standard values are stored at the factory.
3-1. Setup Menu
e)
.)
e) .)
3-11(E)