Trail Settings - 23 - Sony HDS-7100 User Manual

TRAIL SOURCE Settings – 22.1
You can replace the afterimage part of a recursive effect with a
different video.
In the FREEZE & RECUR menu, press F8 (TRAIL SOURCE) to
display the TRAIL SOURCE menu.
RECUR TRAIL
SOURCE
COLOR TYPE
TRAIL SOURCE menu soft key indications
Replacing the afterimage part with a different video – F2
(TRAIL COLOR)
Press F2 (TRAIL COLOR), turning it on.
This replaces the afterimage part of a recursive effect with a
different video.
Selecting the video for the afterimage part – F4
(SOURCE TYPE)
Press F4 (SOURCE TYPE), and select the video or color matte to
be used for the afterimage part.
FLAT: a single hue
HUE ROT: a progressively changing hue
EXT VIDEO: external video
Select the color, or carry out adjustments as follows. (When you
select "EXT VIDEO" there are no adjustments.)
Selecting a single-hue matte for the afterimage part – F4
(SOURCE TYPE) "FLAT"
After pressing F4 (SOURCE TYPE) and selecting "FLAT", set the
color parameters.
• Left knob ("Lum"): luminance (0 to 100%)
• Center knob ("Sat"): saturation (0 to 100%)
• Right knob ("Hue"): hue (0 to 359.99˚)
5-25
Chapter 5 Special Effects Operations