Rep 4.1.6: Scanner Cover Open Switch - Xerox 450c Service Manual

REP 4.1.6: Scanner Cover
Open Switch
Parts List: 1.1
To remove the scanner cover open switch:
1. Perform the following:
a. REP 1.1: WorkCentre Cover on page 4-3
b. REP 3.1.1: Control Panel on page 4-27
2. Remove the 4 screws that secure the scanner
cover to the scanner chassis.
3. Disconnect the scanner cover open switch
wiring harness at connector J1 on the scanner
relay board.
Scanner cover
open switch
Scanner relay board
Figure 4-45 Scanner cover open switch
4. Push up on the bottom of the switch to
remove it from the slot.
Page 4-36
www.printcopy.info
Xerox WorkCentre 450c/450cp Service Manual