Rep 4.1.4: Scanner Relay Board - Xerox 450c Service Manual

REP 4.1.4: Scanner Relay
Board
Parts List: 1.1
To replace the scanner relay board, refer to Figure
4-43 and perform the following:
1. Perform the following:
a. REP 1.1: WorkCentre Cover on page 4-3
2. Disconnect all wiring harnesses connected to
the scanner relay board.
3. Remove the screw that attaches the scanner
relay board to the scanner chassis.
Figure 4-43 Scanner relay board
Page 4-34
www.printcopy.info
Xerox WorkCentre 450c/450cp Service Manual