REP 2.1.5: Paper Feed Motor
Parts List: 2.1
1. Perform the following:
a.
REP 1.1: WorkCentre Cover on page 4-3
b. REP 2.1.18: Printer Assembly on page 4-
24
c.
REP 2.1.10: Pump on page 4-13
2. Disconnect the scanner motor wiring harness
from connector J6 on the printer interface
PWB. See Figure 4-4.
Paper feed motor wiring harness
Figure 4-4 Paper feed motor wiring
harness
3. Remove the mounting screws indicated in
Figure 4-5.
Page 4-8
Remove mounting screws
Figure 4-5 Paper feed motor
4. Remove the paper feed motor. Be careful not to
damage the wiring harness as you route it through
the printer.
www.printcopy.info
Xerox WorkCentre 450c/450cp Service Manual