System Check: Send Fax Test (continued)
The document feeds all the
way through the scanner. The
scanner motor stops after the
document ejects.
YES
The machine dials the remote
fax. Tones or pulse dials are
audible. The transmit LED is
lit, and the following displays
on the LCD:
Connecting...
xxx-xxxx
followed by:
Dialing...
xxx-xxxx
The following (or similar)
displays on the LCD:
Sending
01/01
xxx-xxxx xx% free
The following displays on the
LCD:
Sending
01/01
Completed
The following (or similar)
displays on the LCD:
Load page face down
10:45 am
100: free
The fax was received by the
remote machine.
Perform System Check Receive Fax
Test on the following page.
Page 1-8
NO
Go to Doc and Read Point
Sensor RAP 5.1.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
If tones or pulse dials are not
audible, go to Analog
Communications RAP 6.1. If the
transmit LED is not lit, go to the
LED RAP 7.3
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
Go to Analog Communications
RAP 6.1
www.printcopy.info
Xerox WorkCentre 450c/450cp Service Manual