Xerox Workcentre 450C/450Cp Service Manual; Rep 3.1.2: Adf Pad - Xerox 450c Service Manual

REP 3.1.2: ADF Pad

Parts List: 4.1
1. Open the scanner cover. The ADF pad is
located on the back side of the scanner
cover (Figure 4-35).
Figure 4-35 ADF pad
2. Remove the ADF pad assembly. Squeeze the
two sides of the plastic housing that holds the
pad and remove the housing with the pad
(Figure 4-36.
Page 4-28
Figure 4-36 ADF pad removal
3. Replace the ADF pad by inserting the plastic tabs on the
housing into the slots in the back side of the scanner cover
and snapping the pad into place.
NOTE: Be sure to reset the ADF pad counter as
described in Final Actions.
www.printcopy.info

Xerox WorkCentre 450c/450cp Service Manual