Removing The Right And Left Ld Roller Assembly - Epson Stylus COLOR 760 Service Manual

EPSON Stylus COLOR 760

4.2.4.5.2 Removing the Right and Left LD Roller Assembly

1. Disassemble the ASF assembly and remove the Paper Feed Roller
Assembly and Hopper Assembly from the ASF Assembly. (Refer to the
Section 4.2.4.5.1)
1. Release the two hooks fixing the LD Roller Cover to the Paper Feed Roller
Assembly. Refer to Figure 4-34.
2) Release the two hooks fixing the LD Roller Assembly at around the shaft
hole of the Paper Feed Roller Assembly. Refer to Figure 4-34.
Hooks for the LD
Roller Assy.
Figure 4-34. Releasing hooks for LD Roller
Disassembly and Assembly
Hooks for the LD
Roller Cover
Disassembly Procedures
n
When installing the LD roller assembly, make sure that the
hooks are hung on the Paper Feed Roller Assembly.
n
Do not touch the surface of the LD Roller with hand.
Revision C
97