2.7
Utility Call Key
2.7.1
Utility call key setting
The key position for calling the main menu of the utility can be specified.
For the key position, the specification of 1 point from 4 corners on the screen, or no specification, can be set.
(No specification can be set when GT Designer3 is used.)
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
2.7.2
Display operation of the utility call key setting
GOT basic setting
Touch [Utility call key].
POINT
POINT
POINT
Operation setting by GT Designer3
Set the utility call key at [GOT set up] in [Environmental Setting] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Screen Design Manual
Utility call key
Touch a button
to be set
as the utility call key.
2.7 Utility Call Key
2
2 - 25