Mitsubishi Electric GOT2000 Series User Manual page 333

■2. Installation operation
BootOS and OS which are written in drive A (Built-in SD card), drive B (USB drive), drive E (USB drive), drive F (USB
drive), and drive G (USB drive) can be installed in GOT.
(The following procedure uses drive A as an example.)
Step 1.
Install the data storage to which package data to be installed is written to the GOT.
For installation/removal procedure of data storages, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
Step 2.
Touch [A:Built-in SD card] in the drive selection.
Step 3.
Touch the [Install] button.
Step 4.
Touch the installation destination drive.
Step 5.
Touch the [Exec.] button.
Step 6.
In the dialog shown below, touch the [OK] button to start the installation.
To cancel the installation, touch the [Cancel] button.
6.8 Package Data Management
6
6 - 103