Mitsubishi Electric GOT2000 Series User Manual page 407

Step 3.
Touch the numerical values of baud rate to switch them repeatedly.
The numerical values are set using the ten-key depending on the setting.
"0" to "9":
Use these keys to enter numerical values. Enter "0" to disable the screen saver function.
"ESC":
Closes the ten-key window without saving any value entered
"AC":
Deletes the entire string of numerical characters that are being entered "DEL":
Deletes a digit from a string of numerical characters that are being entered
"ENT":
Enters the value for the clock that has been entered and closes the ten-key pad window
"+/-":
Switches between positive and negative values. (Only positive values are valid for the clock setting.)
".":
Invalid key (not used)
Step 4.
Touch the button to display the window confirming whether to save the settings.
Step 5.
Touch the [YES] button to save the settings and restart. Touch the [NO] button to discard the changes.
POINT POINT POINT
Communication parameters
The types of items that are in the communication parameter setting menu depend on the type of
communication driver that is installed on the GOT in use.
Refer to the section below for the setting contents of various drivers.
Example: 4800 bps 9600 bps 19200 bps
➠ GT Designer3 (GOT2000) Help
11 - 11
11.1 Standard I/F
11