Setting The Utility Call Keys - Mitsubishi Electric GOT2000 Series User Manual

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Setting the utility call keys

■1. Utility call key setting function

The key position for calling the main menu of the utility can be specified.

For the key position, the specification of 1 point from 4 corners on the screen, or no specification (0 point), can be set.

By keeping pressing the screen, a setting to switch the screen to the utility is available.

This prevents a switching to the utility by an unintentional operation.

■2. Utility call key display operation

[GOT Setup].

Utility call key

Refer to the following for display operation of main menu.

Operation setting by GT Designer3

Set the utility call key by selecting [Common] → [GOT Environmental Setting] → [GOT Setup...]

from GT Designer3.

When change a part of the setting, change the setting by the GOT display setting after

downloading the project data.

GT Designer3 (GOT2000) Help

Touch the button to be

set as a utility call key.

9.3 Utility Display

[Operation].

12.2 Operation Settings (Settings for Operation)

Show Quick Links

Table of Contents