2.4.3
Setting procedure for the IP address
■1. Standard Ethernet and wireless LAN
(1) IP address, subnet mask, default gateway, peripheral software port No., and transparent port No.
Step 1.
Touch the entry box for the setting item to display a software keyboard.
Input a value with the keyboard.
Step 2.
Touch the [OK] button to restart the GOT and reflect the setting.
To cancel the setting, touch the [Cancel] button to return to the main menu.
(2) Behavior of duplicate IPs
This item is settable in [Standard Ethernet] only.
Step 1.
Touch the selection for the setting item to switch the selection.
This setting determines the behavior of the GOT when a device with the same IP address connects to the
network on which the GOT resides.
• [Maintain a network connection (rec)]
Displays a system alarm, and maintains the network connection for the GOT.
• [Do not maintain a network connection]
Disconnects the GOT from the network.
Step 2.
Touch the [OK] button to restart the GOT and reflect the setting.
To cancel the setting, touch the [Cancel] button to return to the main menu.
POINT
POINT
POINT
Settings of [Per. S/W port No.] and [Transparent port No.]
You cannot set the same port number for [Per. S/W port No.] and [Transparent port No.].
Set a different port number for each setting item.
2 - 15
2.4 IP Address
2