Mitsubishi Electric GOT2000 Series User Manual page 75

■3. Setting procedure for the time setting
(1) Current time
Carry out the display and setting of GOT clock data.
The setup methods of clock data are shown below.
Step 1.
Touch the current date and time to display the keyboard and stop the clock update.
Step 2.
Input date and time with the keyboard by referring to the table below.
The input date and time are reflected after step 3 is performed.
The day of the week on the input date is displayed automatically.
The following shows the setting range of the date.
Jan. 1, 2000 to Dec. 31, 2099
Key
[0] to [9]
,
[Del]
[Enter]
[Cancel]
Step 3.
To reflect the new setting and return to the Main Menu, touch the [OK] button.
To cancel the new setting and return to the Main Menu, touch the [Cancel] button.
(2) GOT internal battery voltage status
Displays battery voltage status.
Display
Normal
Low/None
When the battery voltage is low, replace the battery immediately.
Refer to the following for battery replacement procedure.
➠
GOT2000 Series User's Manual (Hardware)
Input numeric value in cursor position.
Move the cursor.
Move the cursor to the left by one character when [Del] Key is touched while inputting year, month, day, time, minutes,
seconds.
Close the keyboard after the input time is displayed in clock display.
Cancel the input time and returns the time of clock display to the time at which the keyboard was displayed and close the
keyboard.
Normal
Voltage drop or no battery installed
Description
Status
2.9 Time
2
2 - 33