Mitsubishi Electric GOT2000 Series User Manual page 89

(3) Time difference from GMT
Step 1.
To change the setting of [hour], touch the up or down button on the left side of [hour].
To change the setting of [Min.], touch the pull-down menu button on the left side of [Min.] and select an item
from the list.
Step 2.
Touch the [OK] button to display a restart confirmation dialog.
Restart the GOT to operate with the new setting.
If touch the [Cancel] button, the changed settings are canceled and the screen returns to the Main Menu.
POINT POINT POINT
(1) When connecting to an external device which does not have clock function
(2) Time setting and battery
(3) Time display
(4) Changing times
If the GOT is connected to an external device (such as a PLC or microcomputer) that has no
clock function, setting [Adjust] or [Broadcast] does not synchronize the clock data between
the GOT and external device.
For the list of the PLCs having the clock function, refer to the following.
➠
GOT2000 Series Connection Manual for the controller used
For details of [Adjust] and [Broadcast], refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
The GOT built-in battery is not connected to the GOT at factory default.
To use the time notification function, connect the GOT built-in battery and then configure the
time setting.
For information on how to connect the GOT built-in battery, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
The GOT displays the current time to which the local time setting is reflected.
For the local time setting, refer to the following.
➠
2.9.5 Local time
If you have changed the present time of the GOT where the time setting function or the time
notification function was being used, the new time setting will be written to the PLC.
Thus, you can change the time of the PLC from the GOT even when the time setting function
is being used.
For details of [Adjust] and [Broadcast], refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
2 - 47
2.9 Time
2