Operation Of Batch Self Check - Mitsubishi Electric GOT2000 Series User Manual

4.1.3

Operation of batch self check

■1. Batch self check
Step 1.
Touch the selection of [Export system status log] to switch the set drive. Each touch changes the selection
in the following order: [A drive] → [B drive] → [E drive] → [F drive] → [G drive] → [Not exported] → [A drive].
If you select drive A, insert an SD card into the drive. If you select drive B, drive E, drive F, or drive G, install
a data storage on the drive.
If the batch self check is started with no SD card or data storage installed, the system status log is not
saved.
(The system status log is for manufacturer investigation only. Customers cannot view it.)
Step 2.
Touch the [Start] button to start Batch self check.
Touch the [×] button to return to the main menu.
4.1 Batch Self Check
4
4 - 3