Mitsubishi Electric GOT2000 Series User Manual page 346

■3. Operation to back up all data in the SRAM user area
Step 1.
To back up data in the SRAM user area to a drive
Select the drive where the data is stored, and then touch the [Backup all area] button.
Step 2.
The dialog box shown below appears.
Check the description of the dialog box. To back up all data in the SRAM user area, touch the [OK] button.
To cancel the backup, touch the [Cancel] button.
Step 3.
When touching the [OK] button in step 2, the dialog box shown below appears for recheck.
To start the backup, touch the [OK] button.
To cancel the backup, touch the [Cancel] button.
Step 4.
When the file, whose name is the same, exists in the destination folder, the dialog box shown below
appears without starting the backup.
To overwrite the file, touch the [OK] button.
To cancel the backup, touch the [Cancel] button.
Step 5.
The completion dialog box appears when the backup is completed.
To close the dialog box, touch the [OK] button.
6 - 116
6.10 SRAM management