Step 2.
The dialog shown below is displayed.
Touch [OK] button, and then the Admin password authentication screen is displayed. Input the
administrator password.
Character types to be input can be changed with touching the following buttons.
[A-Z]: Alphabet capital
[a-z]: Alphabet small letter
[0-9]: Numeric
When the input is completed, touch the [Enter] key.
Step 3.
When the administrator password is correctly input, the dialog shown below is displayed and the operator
information stored in an SD card is imported to the GOT.
(10) Export operation
Export the operator information stored in the GOT to an SD card.
Step 1.
Touch the [Export] button.
2 - 88
2.14 Operator Authentication