Mitsubishi Electric GOT2000 Series User Manual page 532

■2. How to use the password for the backup/restoration
The following shows the operation procedure of the backup after the password for the backup/restoration has been set.
For details of the operation screen, refer to the following.
➠
(1) Backup
Touch [Backup] on the main menu.
(Second backup or later)
Input the password for the backup/restoration.
No
Is there any password set for
Automatic authentication is conducted using
the password on the controller side saved in
the backup setting (in units of files).
Yes
Yes
Yes
(When a controller list file exists)
*1
15 - 58
15.8 Backup and Restoration
15.8.6 Display operation of backup and restoration
Start
*1
Is the password correct?
Yes (for other than FXCPU)
the file to be backed up?
Yes
Is the password correct?
Yes
File is backed up.
Is there any other file?
No
Is there any other units?
(When a multiple
CPU system is used)
No
Is there any other controller
that is to be backed up?
No
Was the password on the
controller side changed?
No
Backup is completed.
For the details, refer to the following.
➠
15.8.6 Display operation of backup and restoration
Yes (for FXCPU)
If a keyword has been set, clear it.
No
No Input the changed
password on the
controller side manually.
Set the password for the backup/restoration
using 32 characters or less
(alphanumeric characters and symbols only).
Yes