Data Control; Data Type And Storage Location - Mitsubishi Electric GOT2000 Series User Manual

6. DATA CONTROL

A system application, project data (screen data), or alarm data which is written in the GOT or data storage can be displayed,
and the data can be transferred between the GOT and data storage.
The format of the data storage is also possible.
6.1

Data Type and Storage Location

■1. System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
GOT
(Built-in flash memory)
BootOS
System
Install
application
Download
Project
data
A drive
(Standard SD card),
B drive
(Extended memory card)
SD card
(when installed in GOT)
Item
BootOS
BootOS
Basic system application
System
PLC communication driver
application
*1
System application (Extended function)
*1
Project data
Project
(Including recipe setting, alarm conditions, time action, and GOT setup.)
data
*1 The USB memory can be used from Utility.
➠
*2 When using the project data stored in the Built-in SD card (A drive) with the GOT, hold the SD card installed to the GOT.
For the USB memory, store the project data to the Built-in SD card (A drive) or built-in flash memory (C drive).
C drive
BootOS
System
Upload
application
Project
data
E drive
(USB drive)
USB memory
(when installed in GOT)
Data type
7.3.2 Installing using the data control function (Utility)
BootOS
System
application
Install
Project
Download
data
Upload
Project
data
Copy files on
Windows
Project
data
Inserting/
Removing
SD card
(when installed
in PC)
• Built in flash memory (C drive)
• Built-in SD card (A drive)
• Built in flash memory (C drive)
• Built-in SD card (A drive)
• Built-in flash memory (C drive)
6.1 Data Type and Storage Location
PC
GT Designer3
Write
BootOS
Project
data + OS
USB memory
(when installed
in PC)
Storage location
*2
*2
*2
6 - 1
6