Prior Preparations For Installing Bootos And System Application; Bootos And System Application Installation Using Data Storage - Mitsubishi Electric GOT2000 Series User Manual

18.2 Prior Preparations for Installing BootOS and System Application

For the installation using GOT, the data storage that is storing BootOS or the system application is required.
There are the following three methods for the installation of BootOS and system application.
■1. [To Memory Card] from GT Designer3
➠
■2. Uploading from another GOT (the package data has been installed)
➠
■3. Using an SD card that stores data with OS boot drive set to A drive
➠
Write Option
18 - 2
18.2 Prior Preparations for Installing BootOS and System Application
GT Designer3 (GOT2000) Help

18.3 BOOTOS AND SYSTEM APPLICATION INSTALLATION USING DATA STORAGE

GT Designer3 (GOT2000) Help
POINT POINT POINT
Precautions when installing BootOS and the package data into an SD card
When installing BootOS and the package data into the SD card, be sure to execute by the utility
of another GOT or GT Designer3.
The installation is not executed properly with the SD card to which data is uploaded from the
utility of GOT or copied by software other than GT Designer3.
Note the available capacity of the SD card.
The available capacity of BootOS and system applications can be confirmed by [To Memory
Card] or [Write Option] of GT Designer3.
Available space of the data
Available space of the system application