Function Setting - Mitsubishi Electric GOT2000 Series User Manual

2.14.3

Function setting

■1. Function setting
(1) Function setting
The functions for the operator information can be set.
The following items can be set.
Item
Auth method
Automatic logout time
Password expiration date
Initial position input
Valid byte count input
Upon login failure, prohibit login
for a set period of time
Upon login failure, lock the
operator (individually)
(2) Display operation of function setting
GOT basic setting
Operator authentication
Touch
[Function setting].
Description
The authentication method can be switched. ([Operator name + password],
[External auth (general)])
When [External auth (general)] is selected, the [Enable operator name/pswd
authentication] check box appears.
The time from when the last time the GOT is operated until when you
automatically log out of the GOT can be set. (1 to 60 minutes, 0 is invalid.)
Set the item for regularly changing the password to be used for the operator
authentication. (1 to 1000 days, 0 is invalid.)
When the password is out of date after setting the password, the GOT
requests the password change.
Set the initial position input (byte count) of external authentication ID from
among the data read from the external authentication device. (0 to 1998 bytes)
Set the valid byte count for external authentication ID. (2 to 16 bytes)
Set the continuous failure count to block login. (3 to 10 times, 0: invalid)
Set the prohibition time. (1 to 3600 seconds)
Set the continuous failure count to lock an operator ID. (3 to 10 times, 0:
invalid)
Touch
[Operator
authentication].
Function setting
(b)1) Authentication method
(a)2) Automatic logout time
(c)3) Password expiration date
(d)4) Initial position input
(e)5) Valid byte count input
(f)6) Continuous failure count to
block login
(g)7) Login prohibition time
(h)8) Continuous failure count
to lock an operator ID
2.14 Operator Authentication
2
Reference
2 - 93