Mitsubishi Electric GOT2000 Series User Manual page 98

■3. Channel number setting operation
Step 1.
Touch channel number specification menu BOX to be set.
Step 2.
The cursor for the channel number specification menu BOX is displayed.
Simultaneously the keyboard for a numerical input is displayed.
Step 3.
Input the channel number from the keyboard and touch [Enter] key, and the value is defined.
Simultaneously, the name of the communication driver corresponding to the channel number assigned by
GT Designer3 is displayed in the driver display BOX.
■4. Communication detail setting switching operation
Step 1.
If the driver display BOX is touched on the communication setting screen or Ethernet I/F assign screen, the
screen switches to the detailed setting screen of the related controller device.
➠
2 - 56
2.10 Controller
2.10.5 Communication detail setting