■3. Security level change operation
(1) Input operation of password
Step 1.
By touching [0] to [9], [A] to [F] key, the password of the changed security level is input. Character types to
be input can be changed by touching the [KEY] button.
Step 2.
When correcting the input character, touch [Del] key to delete the correcting character and input the
password again.
Step 3.
After inputting password, touch the [Enter] key.
When the password is not matched, displays the error message.
Step 4.
If [OK] button is touched it returns to the password input screen again.
Step 5.
If the
13 - 2
13.1 Security Level Authentication
button is touched, it returns to the security setting screen.
POINT
POINT
POINT
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return the security
level to the original level.