Clock Setting Operations; Setting; Setting And Display) - Mitsubishi Electric GOT2000 Series User Manual

14.1.3

Clock setting operations

■1. Time setting
Setup the method to adjust the time between GOT data and the clock data of controller connected to the GOT.

Setting

Adjust
*1
Broadcast
None
*1
Step 1.
Touch a setting item to change the setting.
Step 2.
After changing the settings, touch the [×] button to save the changes and close the setting window.
14 - 2
14.1 Time Setting and Display
Synchronizes the clock data of the GOT with the clock data of the controller.
It is same as set in the GOT setup in Environmental Setting of GT Designer3.
➠
GT Designer3 (GOT2000) Help
Synchronizes the clock data of the controller with the clock data of the GOT.
It is same as set in the GOT setup in Environmental Setting of GT Designer3.
➠
GT Designer3 (GOT2000) Help3
No adjustment of clock data.
GT2103-P cannot be specified.
POINT POINT POINT
(1) When connecting to an external device which does not have clock function
If set to [Adjust] or [Broadcast] for clock setting while the GOT is connected to external
devices (PLC or microcomputers) which do not have clock function, the clock data will not be
adjusted.
Refer to the following for the list of PLC installed with clock function.
➠
GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Help
(2) Clock setting when using the multi-channel function
The channel No. of a controller whose clock is used as a base or adjusted cannot be set by
the utility.
The controller whose clock is used as a base or adjusted can be set by GT Designer3.
For channel settings, refer to the following.
➠ GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Help
(3) Setting of clock setting and battery
When selecting [Broadcast] or [None] in clock setting, set the clock of the GOT once with
connecting a battery to the GOT.
Description
Touch the item
to be changed.