Operation; Operation Setting - Mitsubishi Electric GOT2000 Series User Manual

2.6

Operation

2.6.1

Operation setting

Setting regarding GOT operation can be set.
The items which can be set are described below. If touch the each item part, the respective setting becomes possible.
Function
Buzzer volume setting
Musical interval setting
Window move buzzer volume setting
Key sensitivity setting
Access switch for the drive A
*1
2 - 22
2.6 Operation
Buzzer volume setting can be changed.
The setting of the musical interval for the buzzer sound can be changed.
Whether turn ON/OFF buzzer when move window can be selected.
The touch panel sensitivity when touching the GOT screen can be set.
E.g. a setting can be changed when double-touch is made when touching
the GOT screen only once. (For preventing chattering)
Set whether to access drive A or not while the cover of an SD card interface
is open.
Relation between the [Key sensitivity] setting and reaction speed
The larger the set value in [Key sensitivity] is, the shorter the time taken from touching the touch panel until the GOT responds
becomes. E.g. decrease the value set for [Key sensitivity] when double-touch is made when touching the GOT screen only once.
(Decrease the reaction speed.)
POINT POINT POINT
Operation setting by GT Designer3
Set buzzer volume and window move buzzer volume by [GOT setup] in [Environmental Setting]
of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description Setting range
OFF/SHORT/LONG
<At factory shipment: SHORT>
1 to 5
<Default: 4>
ON/OFF
<At factory shipment: OFF>
*1
1 to 8
<Default: 6>
Unignore/Ignore
<Default: Unignore>