Setting Procedure For The Ip Filter - Mitsubishi Electric GOT2000 Series User Manual

2.5.3

Setting procedure for the IP filter

■1. Setting IP addresses
Step 1.
Touch the down arrow of the [IP filter usage] list box and select [Yes].
Step 2.
Touch the down arrow of the [Access from the following address] list box and select [Transmit] or [Block].
Step 3.
Touch a start IP address entry box in the [Target IP address] section in the filtering list to display a software
keyboard.
Input a value with the keyboard.
Step 4.
For specifying an IP address range and setting an IP address excluded from a specified range, refer to the
following.
Specifying IP address ranges
(1) Specifying IP address ranges
Setting exception IP addresses
(2) Setting exception IP addresses
Step 5.
Touch the [OK] button to restart the GOT and reflect the setting change.
To cancel the setting change and return to the Main Menu, touch the [Cancel] button.
To change the setting for each item to its default, touch the [Default] button.
(1) Specifying IP address ranges
Step 1.
Touch the checkbox in the filtering list to display the end IP address entry boxes in the [Target IP address]
section.
Step 2.
In the filtering list, touch any IP address entry box in [Target IP address] to display a software keyboard.
Input a value for each box with the keyboard.
2 - 20
2.5 IP Filter Setting
2. 2.
3. 3. 3.
2. 2. 2. 2.
1. 1.
1. 1.
5.