Fx3U-Enet-Adp Communication Setting Function; Specifications - Mitsubishi Electric GOT2000 Series User Manual

16.3 FX3U-ENET-ADP Communication Setting Function

In GX Works2, the communication set value of the FX3U-ENET-ADP stored in the CPU can be changed.
This function is not available when the communication set value of the FX3U-ENET-ADP is not set in advance in the CPU.
16.3.1

Specifications

■1. System configuration
This section describes the system configuration of the FX3U-ENET-ADP communication setting function. For the
setting method in each connection form, used communication unit/cable and cautions on connection form, refer to the
following manual.
➠
GOT2000 Series Connection Manual
■2. Required basic system application
OS
Basic system application
Communication
MELSEC-FX
driver
■3. Connection type
Name
FX3U-ENET-ADP communication
setting function
■4. Communication setting items
The table below shows the communication setting items and setting range.
Communication setting items
IP address
*1
Subnet mask pattern
Default router IP address
*1 Set the value "0.0.0.0" when not using the subnet mask pattern and default router IP address.
POINT POINT POINT
(1) Communication setting in the CPU
In GX Works2, set in advance the communication set value of the FX3U-ENET-ADP to the
CPU. For the details of the communication setting, refer to the following.
➠
FX3U-ENET-ADP User's manual
(2) Connection type for the FX3U-ENET-ADP communication setting function
This function can be used only when the connection between the GOT and FXCPU is the
direct CPU connection.
➠
GOT2000 Series Connection Manual (Mitsubishi Product)
Version
-
-
Function
Description
The communication set value of the FX3U-ENET-
ADP stored in the CPU can be changed.
Setting range
0.0.0.1 to 223.255.255.254
192.0.0.0 to 255.255.255.252
*1
0.0.0.1 to 223.255.255.254
16.3 FX3U-ENET-ADP Communication Setting Function
( : Applicable, : Partly restricted,
Connection type between GOT and controller
Direct CPU
GOT multidrop connection
connection
Remark
If a value outside the setting range is entered, the error
message "SET NUMBER IS INCORRECT." appears.
: Inapplicable)
16
16 - 41