Mitsubishi Electric GOT2000 Series User Manual page 560

■4. Functions list and monitor conditions
The following shows the memory that can be monitored by the MELSEC-FX list editor and the FX PLC status
conditions.
Function
Displaying sequence
Reading
programs
sequence
Searching commands/
programs
devices
Writing commands
Writing
sequence
Changing operands/
programs
set values
Inserting commands
Deleting commands
Sequence program all clear
PLC diagnostics
Parameter setting
Keyword
*1
*2
16 - 16
16.2 FX List Editor (GT2105-Q, GT2104-R only)
( : Can be monitored : Can be monitored under certain conditions : Cannot be monitored)
Built-in
memory
Display
Setting
The operation is available only when the protect switch is OFF.
The available memory differs depending on the FX PLC being used.
For details, refer to the following.
➠
The hardware manual of the FX PLC being used
Memory that can be monitored
EEPROM
RAM memory
memory cassette,
cassette flash memory
cassette
*1
*1
*2
FX PLC
EPROM
status
memory
cassette
RUN/STOP
For Stop only
RUN/STOP
For Stop only
RUN/STOP
Reference
➠
16.2.8
➠
16.2.9
➠
16.2.10
➠
16.2.11
➠
16.2.10
➠
16.2.12
➠
16.2.13
➠
16.2.14
➠
16.2.15
➠
16.2.16