Commonly Used Parameters - Explanations; Main Menu; Operation/Display - Danfoss vlt AQUA Instruction Manual

8 How to program the adjustable frequency
drive
After selecting a parameter group, choose a parameter using the navi-
gation keys.
The middle section on the GLCP display shows the parameter number and
name, as well as the selected parameter value.

8.2 Commonly Used Parameters - Explanations

8.2.1 Main Menu

The main menu includes all available parameters in the VLT
All parameters are grouped logically with a group name indicating the function of the parameter group.
All parameters are listed by name and number in the section
All parameters included in the quick menus (Q1, Q2, Q3, Q5 and Q6) can be found in the following.
8
Some of the most commonly used parameters for VLT
For a detailed explanation of all parameters, please refer to the VLT
or by ordering it from the local Danfoss office.
8.2.2 0-** Operation / Display
Parameters related to the fundamental functions of the adjustable frequency drive, function of the LCP buttons and configuration of the LCP display.
8-8
Figure 8.10: Display example.
®
AQUA Drive FC 200 adjustable frequency drive.
Parameter Options in this Instruction Manual.
®
AQUA Drive applications are also explained in the following section.
®
AQUA Drive Programming Guide MG.20.OX.YY which is available at www.danfoss.com
®
MG.20.M5.22 - VLT is a registered Danfoss trademark
®
VLT AQUA Drive
Instruction Manual